Study on deepwater conductor jet excavation mechanism in cohesive soil     

《Applied Ocean Research》2019

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.  相似文献   

浮游植物metacaspase的分布、结构及其功能特性     

苏金净  蔡伟聪  李桂玲  李健  曾珺  刘静雯 《海洋与湖沼》2019,50(5):1059-1069

精氨酸/赖氨酸特异性半胱氨酸蛋白酶(Metacaspase)在浮游植物程序性细胞死亡(programmed cell death.PCD)过程中起着关键作用。本文利用生物信息学方法分析metacaspase基因在浮游植物中的分布,并以海洋球石藻(Emilianiahuxleyi)metacaspases(EhMCs)为代表分析其结构和功能,依据Uniprot和String数据库挖掘与metacaspase功能相关并参与浮游植物PCD过程的互作蛋白。结果发现:共计29条、四种类型的metacaspases分布于11种浮游植物中,它们的metacaspase蛋白一级结构存在明显差异,但位于p20的组氨酸和半胱氨酸活性位点均具有高度的保守性;EhMCs三级结构与酵母的metacaspase十分相似,暗示它们具有类似的功能;浮游植物metacaspases与多种蛋白存在直接或间接的互作关系,在细胞PCD过程、响应环境胁迫和能量代谢等方面发挥重要作用。另外.metacaspase的磷酸化修饰可能在浮游植物PCD信号转导过程中起调节作用。  相似文献   

Experimental study on hydrodynamic performance of SWATH vessels in calm water and in head waves     

《Applied Ocean Research》2019

An extensive experimental investigation on four SWATH hull forms has been conducted in calm water and in regular waves at University of Naples Federico II. Calm water tests have been analyzed in the range of Froude number Fr_T from 0.1 to 0.6. For all four SWATH configurations at the speed, corresponding to Fr_T 0.32, the behaviour in regular waves has been tested. The results of heave, pitch and vertical accelerations are presented in nondimensional form as RAO. For the “most promising” SWATH #4 configuration, a set of stabilizing fins have been designed and an active stabilization system has been developed. The developed SWATH#5 has been tested in calm water on three displacements in the range of Fr_T from 0.1 to 0.65. The dynamic wetted surface has been identified and the residual resistance coefficient C_R as well as R_T/Δ are reported. Seakeeping tests have been performed in regular head sea and in head and following irregular sea at Fr_T = 0.50. The conditions for the occurrence of dynamic longitudinal instabilities have been identified. The results allows to comment the effect of slenderness of struts and SWATH’s immersed bodies on resistance and seakeeping and concerns the applicability of SWATH concept to small craft.  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

时间尺度重构EEMD-GRNN改进模型预测PM2.5的研究     

符海月  张祎婷 《地球信息科学学报》2019,21(7):1132-1142

合理构建PM_2.5浓度预测模型是科学、准确地预测PM_2.5浓度变化的关键。传统PM_2.5预测EEMD-GRNN模型具有较好的预测精度,但是存在过于关注研究数据本身而忽略其物理意义的不足。本研究基于南京市2014-2017年PM_2.5浓度时间序列数据,分析PM_2.5浓度多尺度变化特征及其对气象因子和大气污染因子的尺度响应,基于时间尺度重构进行EEMD-GRNN模型的改进与实证研究。南京市样本数据PM_2.5浓度变化表现为明显的天际尺度和月际尺度,从重构尺度（天际、月际）构建GRNN模型更具有现实意义;同时,PM_2.5对PM₁₀、NO₂、O₃、RH、MinT等因子存在多尺度响应效应,以其作为GRNN模型中的输入变量更具有时间序列上的解释意义。改进后的EEMD-GRNN模型具有更高的PM_2.5浓度预测精度,MAE、MAPE、RMSE和R²分别为6.17、18.41%、8.32和0.95,而传统EEMD-GRNN模型的模型有效性检验结果分别为8.37、27.56%、11.56、0.91。对于高浓度天（PM_2.5浓度大于100 μg/m³）的预测,改进模型更是全面优于传统EEMD-GRNN模型,MAPE为12.02%,相较于传统模型提高了9.03%。  相似文献   

GRB 170817A的洛伦兹因子和观测角          下载免费PDF全文

林一清 《天文学报》2020,61(1):6

伴随着引力波事件GW170817的短暴GRB (Gamma-Ray Burst) 170817A首次提供了双中子星并合与短暴相联系的直接证据.但是短暴GRB 170817A具有非常弱的光度,意味着观测的视线方向可能偏离喷流轴方向.根据短暴静止系的峰值能量E_(p,i)和各向同性光度L_(iso)。之间的关系以及洛伦兹因子Γ和L_(iso)。之间的关系估算了短暴GRB 170817A以及长短暴GRB 060614观测角与喷流边缘的夹角θ'_(obs)和洛伦兹因子Γ,结果表明GRB 170817A的Γ=45±27,θ'_(obs)=2.2±0.5°,而GRB 060614的Γ=214±93,θ'_(obs)=0.5±0.1°.这个结果相当于GRB 170817A的正轴各向同性光度L_(iso,on)=(2.1±0.7)×10~(49) erg·s~(-1),比典型的短暴少2-3个数量级.GRB 060614的L_(iso,on)=(5.12±1.91)×10~(51) erg·s~(-1)与典型短暴相当.这意味着GRB 060614可能属于短暴类型,而GRB 170817A可能本质上就是一个弱暴.  相似文献   

西昆仑玛尔坎苏石炭纪大型锰矿带构造背景与成矿条件     

张连昌  张帮禄  董志国  谢月桥  李文君  彭自栋  朱明田  王长乐 《吉林大学学报(地球科学版)》2020,50(5):1340-1357

西昆仑北段玛尔坎苏地区探明的大型碳酸锰成矿带，是我国近年最重要的找矿成果之一。该锰矿带构造上属北昆仑晚古生代弧后伸展盆地，其构造动力学背景为古特提斯洋向北俯冲于塔里木地块之下形成的弧盆体系。锰矿体主要发育于晚石炭世喀拉阿特河组含炭泥质灰岩夹薄层灰岩中。矿石中主要金属矿物为菱锰矿（75%~95%），次为软锰矿、硫锰矿及少量黄铁矿等。含锰岩系岩性和岩相学研究表明，玛尔坎苏锰矿带属典型的海相沉积锰矿床，其矿床成因可能与晚古生代半局限盆地沉积和海底热液活动有关。海底热液活动可能为成矿提供了丰富的物质来源。含锰岩系元素和同位素地球化学特征表明，玛尔坎苏锰矿沉淀时的水体环境为常氧条件，而矿层下盘（部分）岩系的岩性及地球化学特征反映其沉积时的水体环境为低氧—贫氧条件。玛尔坎苏锰矿带锰矿石具有负的δ¹³C值（-23.3‰~-10.0‰），推测有机质导致的还原作用是该锰矿由原生氧化锰在成岩期转化为菱锰矿和形成富锰矿的重要机制。  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献